Additional information
| Weight | 0.18 kg |
|---|
- You cannot add "Yellow handle to fit GASV07 ½BSP gas valve (fits CKRW) (GASV07H)" to the basket because the product is out of stock.
Stainless steel handle for GASVCE7 (GASVCE7H/GASVCE7SH)
£15.00 +VAT
- Includes hub, handle and grub screw
- Fits GASVCE7 (½” Gas Safety gas valve, excluding old Junker valves fitted in the late 1990s)
- Single grub screw, only suitable where handle points over power setting
- Please ensure the handle you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Related Products
Gas injector jet nozzle cleaning kit (MELEC14)
This kit is specifically designed for cleaning the injector nozzles on vortex style wok burners fitted to wok cookers and other gas appliances.
Inside the metal carry case there are many grooved wires in a variety of widths/diameters. Suitable for all makes and model of wok cooking range, this kit can unblock jets obstructed or constricted by grease build-up to restore performance and flame picture.
Pilot cover shield (fits 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
- Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
- Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
- All 1.2mm 304 stainless steel construction for longevity
- Fits most Far East wok cookers built since September 2007 (3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
- Pilot burners shown in any photos are not included but can be ordered separately
Pilot light 3 way side-entry adjustable (fits CE, CE Eco, CE+, September 2007-2010) (BURN001)
- 3 way adjustable pilot, side entry (G04C CTB/U/3/EXT)
- Stainless steel cover (BURN001A) in photo is not included , please order separately if required
- Can also be replaced with bottom entry pilot BURN00G/A, flexi tube and 6 mm olive.
- Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot flexible tube with olives (FTU)
- Stainless steel flexible tube used to connect the pilot light burner to the gas valve
- Suitable to replace copper and bundy tubes used in older cookers
- 6 mm diameter with a 25 mm neck (some very old cookers will use 4 mm diameter, this will not fit those)
- Supplied with pair of 6mm compression brass olives
- If old flexible copper was providing support to the pilot light, an alternative means of support will need to provided
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Gas burner ½BSP valve with yellow handle (fits CKRW and CETUB) (GASV07)
- Full bore CIM ball valve for gas
- ½” BSP threaded, Female x Female (inner diameter approx 21 mm)
- Complete with yellow aluminium lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Gas equipment fitted with this valve is unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and is not CE or UKCA compliant, nor does it meet Gas Safe current standards. This equipment will be over 25 years old and should be replaced. The exception is Far East CE Turbos which have flame safety and ignition provided electronically.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot light L-shaped JM (fits CKRW) (BURN00B)
This item has been permanently discontinued as of February 2020, VERY limited stock remaining
Replace with BURN00G 3 way bottom entry pilot, FTU01/FTU03 stainless flexible tube (cookers without a pilot mounting bracket will require 6 mm copper tube instead to support the pilot)
Wok cookers utilising this pilot light are unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and thus not CE or UKCA compliant, nor meet Gas Safe current standards. This cooker will be over 25 years old and should be replaced.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
V21 vortex gas burner (BURN20T/BURNV21)
- V21 Vortex burner (these are sometimes erroneously called turbos, but they are atmospheric burners!)
- Comes complete with inner and outer cast collars plus 21 jets (natural gas as standard, LPG by request)
- ½” BSP inlet
- Includes welded mounting bracket to support pilot light and thermocouple as required on Far East wok cookers
NB: inlet size differs between manufacturers, this burner will replace Far East V21 but we cannot advise on purchases for other cookers, which are at your own risk.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
V6 JP1 spider ¼” gas burner (BURN13D)
** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.
- V6 JP1 “Spider” vortex burner which will fit most wok cookers (if not replacing like-for-like, contact the appliance manufacturer first)
- Comes complete with collar and 6 jets (natural gas as standard, LPG by request)
- Dimensions ø255×125, ¼” BSP inlet.
NB: specification differs between manufacturers, this burner will fit Far East cookers but we cannot advise on purchases for other cookers, which are at your own risk. - Weight 9.5 kg
** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.