- Sorry, this product cannot be purchased.
Water tap 3/8BSP valve (Fits all Far East cookers 1998 onwards) GASV00
£25.00 +VAT
- 3/8″ BSP threaded CIM ball valve for water, Female x Female
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Related Products
2 bar burner (BURN07/A)
- Fits all Far East wok cooker rear rings (CKRW, CE, CEFT)
- Suitable replacement for discontinued Black Teknigas bar burners
- 304 stainless steel
- Dimensions (mm): H40 x W100 x D285.
NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, wh
ich are at your own risk. Burners that look the same may have different spacing - Weight 0.9 kg
- Custom spaced bar burners (G31 style) are available for email and phone order from £152+VAT
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot light 3 way bottom-entry (fits CE, CE Eco, CE+ & CEFT, July 2010 onwards) (BURN00G/A)
- 3 way pilot, bottom entry (CTB/MV/3/EXT) with integral injectors to suit Far East wok cookers
- Stainless steel cover (BUPC/BURN001A) in photo is not included, please order separately if required
- Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
LPG variants are on long lead times if there is no stock, then BURN001 can be substituted (note BURN001 will not fit copper tubes, if the cooker doesn’t already have stainless tubes you will need FTU01 or FTU03 as well)
Pilot light L-shaped JM (fits CKRW) (BURN00B)
This item has been permanently discontinued as of February 2020, VERY limited stock remaining
Replace with BURN00G 3 way bottom entry pilot, FTU01/FTU03 stainless flexible tube (cookers without a pilot mounting bracket will require 6 mm copper tube instead to support the pilot)
Wok cookers utilising this pilot light are unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and thus not CE or UKCA compliant, nor meet Gas Safe current standards. This cooker will be over 25 years old and should be replaced.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Cast iron wok ring (XTRAO)
- Heavy duty cast iron (special high temperature grade), built to last! Weighs 11.3 kg / 25 lbs
- Universal fit for front rings: suits hole inner diameters between 278 and 305 mm, click here to see dimension drawing
(this covers all Far East standard size front rings, and most other manufacturer’s wok cooking ranges too), which makes it ideal to replace burnt out rings on most wok cookers.
- 330 mm finished diameter, fits woks Ø12″-16″. Projects 70 mm above the resting point on the cooker
- Reduces gas consumption and cooks faster! Cast iron “dual heat” retains heat and spreads it around the wok.
Burner not included
Gas isolation 1″BSP valve with yellow handle (GASV11a)
- Full bore ball valve for gas
- 1″ BSP threaded, Female x Female (inner diameter approx 32 mm)
- Complete with yellow sleeved lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Supersedes old part GASV11 (1″ CIM isolation valve with aluminium handle) but some pipework adjustment will be necessary as the length is different. The handles are not interchangeable. Alternatively replace the iron pipe for copper and fit a compression valve
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Gas burner ½BSP valve with yellow handle (fits CKRW and CETUB) (GASV07)
- Full bore CIM ball valve for gas
- ½” BSP threaded, Female x Female (inner diameter approx 21 mm)
- Complete with yellow aluminium lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Gas equipment fitted with this valve is unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and is not CE or UKCA compliant, nor does it meet Gas Safe current standards. This equipment will be over 25 years old and should be replaced. The exception is Far East CE Turbos which have flame safety and ignition provided electronically.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot cover shield (fits 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
- Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
- Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
- All 1.2mm 304 stainless steel construction for longevity
- Fits most Far East wok cookers built since September 2007 (3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
- Pilot burners shown in any photos are not included but can be ordered separately
Pilot flexible tube with olives (FTU)
- Stainless steel flexible tube used to connect the pilot light burner to the gas valve
- Suitable to replace copper and bundy tubes used in older cookers
- 6 mm diameter with a 25 mm neck (some very old cookers will use 4 mm diameter, this will not fit those)
- Supplied with pair of 6mm compression brass olives
- If old flexible copper was providing support to the pilot light, an alternative means of support will need to provided
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.