Wok cooker range heavy duty | Far East 威遠企業

Heavy duty Chinese-style water on-top cooled gas wok cooker range with front waste trough for commercial kitchens

Affordable, dependable, capable, economical
Designed and built in the UK by Far East

Key features

Patented shower rail for splash free water

Swivel spout taps that reach all rear rings

Splash proof pilot lights

Removable burner rings

Removable bar burners

Waste basket with integral mesh filter

Welded drip trays

CEFT clip-on rear shelf attached to top of splashback

Removable rear shelf, clips on without tools

Recessed lever action gas & water controls

CEFT detatchable splashback and hinged front maintenance access panel

Detachable splash back for easy transportation

Top-hinged quick access service panel for easy maintenance

Full width front trough for waste water

Height adjustable castor wheels

Class-leading aftersales service and support

5 year cooker top guarantee

12 month warranty

Made in UK from 2.5 mm stainless steel. CE and UKCA certified.

Wok burner gas consumption is stated in kW or BTU, but the flame pattern and length are important too; we provide “boiling water” times to allow a true comparison of cooking speed.

2 bar oriental gas wok burner for rear rings

BURN07A
2 bar
11 kW (37,500 BTU)
Standard rear ring
3:35 to boil 1L of water
Efficient at all power settings, suitable for simmering
Not for prime wok cooking as located at rear of cooker
Removable for easy cleaning

BURN08A
3 bar
18 kW (61,500 BTU)
Standard front ring
2:15 to boil 1L of water
Efficient at all power settings, ideal for simmering
Wide spread of heat with many short flames
Removable for easy cleaning

BURNV12
V12 Vortex
19 kW (64,800 BTU)
Standard front ring
2:00 to boil 1L of water
Efficient at maximum power only
Tall flame ideal for wok stir-frying
Has some power adjustability

BURNV21
V21 Vortex
21 kW (71,700 BTU)
Option front ring
1:55 to boil 1L of water
Efficient at maximum power only
Tall flame ideal for wok stir-frying
Small injector jets require extra cleaning to prevent blockage

CETUB
Turbo
33 kW (112,500 BTU)
Option front ring
1:10 to boil 1L of water
Fan-assisted forced draught pre-mix burner for ultimate power and efficiency
Automatic electronic ignition
Quiet (60 dB(A) at 2 metres)

All our gas wok burners are hot enough for professional stir-frying and suitable for many Asian and Oriental catering styles including Chinese, Thai, Japanese, Vietnamese and Indian.

Models and sizes

Height

790 mm to cooktop
1255 mm to top of splashback
Special order 910 mm (for serve-over and show cooking, no top shelf) CEFTs

Burner rings

Standard Ø290 mm stainless steel ring (BURNRF):

Suitable for Ø12”-15” woks and pans
Space between rings 155 mm (edge-to-edge)

Optional Ø355 mm cast iron ring (CECIR / XTRAO):

Suitable for Ø12”-16” woks and pans
Space between rings 95 mm, larger spacing available as special order (CEFTs)
Drop-in replacement for standard BURNRF rings

Optional Ø430 mm stainless steel tapered ring (BURNRTB):

Suitable for Ø20-Ø22” woks
Reduces frying and blanching time by up to 50%, saving gas.
Drop-in replacement for standard BURNRF rings. Cannot be placed side-by-side.

Special order Ø350 mm stainless steel extra-large ring (CEXLR):

Suitable for Ø16”-22″ woks and pans
Space between rings as requested by special order (CEFTs)

For further details please see the CEFT wok cooker brochure and specification
CAD block (AutoCAD DXF): CEFT wok cooker (standard sizes)

Service connections

CEFT Front Trough Asian and Oriental wok burner range

Gas inlet: Ø28mm 1″BSP flexible Natural Gas (G20 I_2H_,I_2E,I_2E+ or G25 I_2L, I_2E+) or LPG (G31 I_3P), the kW/BTU/m³/hr is dependent on the burners fitted (see Burners section above)
Cold potable water inlet: Ø15mm flexible
Waste drainage: Ø40mm flexible or tundish (requires P trap or similar). For sizing grease traps treat as a large catering sink.
Additional requirements for EACH turbo burner (if fitted):
- Turbo electrical connection: 1A 90W 3 pin socket (BS1363)