2 bar wok burner for rear rings
2 bar burner (BURN07/A)
  • Fits all Far East wok cooker rear rings (CKRW, CE, CEFT), but appearance may vary from what is currently fitted as this part has been upgraded.
  • Suitable replacement for discontinued Black Teknigas bar burners
  • All 304 stainless steel construction. Corrosion resistant and dishwasher safe.
  • Dimensions (mm): H40 x W100 x D285.
    NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, which are at your own risk. Burners that look the same may have different spacing.
  • Weight 0.9 kg
  • Custom spaced bar burners (G31 style) are available for email and phone order from £152+VAT

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£88.00£107.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
2 bar wok burner for front rings
2 bar burner for front rings (BURN07AF)
  • Fits older Far East CKRW cookers only with 2 bar manifold fitted
  • Dimensions (mm): H40 x W125 x D285
    NB: inlet spacing differs between manufacturers, this burner will only fit cookers originally built by Far East, we cannot advise on purchases for other cookers, which are at your own risk and non-refundable.
  • Weight 1.1 kg
£157.00 +VAT Add to basket
3 bar wok burner
3 bar burner (BURN08/A)

 

  • Fits most Far East wok cookers (CKRW, CE, CEFT) with 3 bar manifold fitted
  • Suitable replacement for discontinued Black Teknigas bar burners
  • 304 stainless steel
  • Dimensions (mm): H40 x W160 x D285.
    NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, which are at your own risk. Burners that look the same may have different spacing
  • Weight 1.3 kg

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

 

£102.00£142.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
XTRAO cast iron wok ring (showing turbo burner)
Cast iron wok ring (XTRAO)
Cast iron wok ring (XTRAO)
  • Heavy duty cast iron (special high temperature grade), built to last! Weighs 11.3 kg / 25 lbs
  • Universal fit for front rings: suits hole inner diameters between 278 and 305 mm, click here to see dimension drawing
    (this covers all Far East standard size front rings, and most other manufacturer’s wok cooking ranges too), which makes it ideal to replace burnt out rings on most wok cookers.
  • 330 mm finished diameter, fits woks Ø12″-16″. Projects 70 mm above the resting point on the cooker
  • Reduces gas consumption and cooks faster! Cast iron “dual heat” retains heat and spreads it around the wok.

Burner not included

£220.00 +VAT Add to basket
Fat fryer cleaner (fryer klene)
Fat fryer cleaner demo
Far East Fat Fryer Cleaner (5 kg)
  • Powdered, simply add water and dilute as required
  • Especially formulated for grease removal from all kitchen equipment
  • Famous for its powerful action, very useful for deep cleaning with minimal effort
  • Food safe
  • Economical to use (typically 25g per litre of water when cleaning fryers)
  • Great for cleaning mesh grease filters, simply leave to soak
  • Exclusively by Far East Kitchen Solutions

This is a highly powerful product and MUST be used in conjunction with gloves and goggles!

£26.99 +VAT Add to basket
Steamer descaling powder
Steamer descaling before after
Far East Steamer Descaler Powder (2 kg)

OFFER: Buy 6 for the price of 5 (i.e. one pack is free)! Use code 6FOR5 at the checkout

  • Steamer descaling powder (food grade) in 2.0 kg or 2.5 kg size, packaging may vary between tubs and bags
  • Ideal for use with Far East CEST steamer but can be used with any stainless steel steamer tank
  • Recommend use once per month to remove limescale build up and calcium deposits.
    • Extend the steamer tank life, improve steam generation efficiency and reduce gas consumption.
  • Use 1 pack per steamer tank (no measuring necessary), for heavy scaling use 2 packs
    • Add powder, fill tank with water, heat up, then turn off, cover and leave overnight.
    • In the morning, drain descaling solution and rinse thoroughly. Some scrubbing maybe necessary for heavy scaling.
[1] ŒFlush tank with hot water. [2] Add descaling powder (50g per litre of water. That’s 1 tub for a 40L steamer tank. Double the dose for heavy scale). [3]ŽRefill tank with water to normal operating level. [4]Switch on steamer and heat the water until very hot, but not boiling (as it may overflow). If possible, operate steamer without tank cover [5]Once water is hot, switch the steamer off. If powder has not completely dissolved, agitate water with a suitable implement, avoiding splashing. Cover tank and leave over night. ‘[6]After 8+ hours, drain the tank and flush thoroughly with cold water. For heavy scaling, after rinsing it may be necessary to scrub the tank interior with a stiff bristled brush to loosen remaining scale.  [7]’ Refill steamer with water and heat to normal working temperature, then drain to remove all traces of the descaling solution

Do NOT mix with bleach or other chemicals, this may cause noxious fumes! Avoid contact with skin and wash hands thoroughly after handling. Keep out of reach of children. Contains food grade citric acid (FFC6, E330)

Irritant: Causes serious eye irritation. Wear eye/face protection.   IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.         If eye irritation persists: Get medical advice/attention.   COSHH safety sheet

1 蒸爐水槽加熱水
2 加除垢粉(50g 1公升水)1桶40公升水
3 加水到正常水位
4 加熱(不要沸)
5 水熱後關掉煤氣, 檢查所有除垢粉都溶化, 浸過夜。
6 排掉所有水在槽中,確定所有除垢粉都清洗去。太重垢可能要擦法。
7 加水到正常水位,加熱,排掉所有水在槽中

不可以加其他化學劑一同使用!


OFFER: Buy 6 for the price of 5 (i.e. one pack is free)! Use code 6FOR5 at the checkout

£24.99 +VAT Add to basket
3 in 1 Sanitiser, Degreaser and Shine
Food safe sanitiser and degreaser 3 in 1 information
Food Safe Sanitiser and Degreaser (makes 20 spray bottles)

3 in 1: Degreases, Sanitises and Shines
Scroll down to see demonstration video!

  • Easy to store: Each 10 cm tub makes 20 spray bottles (total 14 litres of chemical)
  • Quick and easy to use: The powder is pre-measured in plastic capsules that dissolve in water. There’s no need to measure or come in to contact with concentrated chemicals. There is no need to cut or pierce the plastic capsules as they dissolve in water, so there’s no mess.
  • Powerful: Degreases, anti-bacterial disinfects and sanitises to BS EN 1276 standards.
  • Food safe: Does not deodorise or contain perfumes/scents
  • Suitable for all commercial kitchen surfaces: Will add a lasting shine to all metal surfaces and suitable for use on plastic and wood too
  • Great Value: equivalent to only 83p per 700 ml bottle!
  • Solucaps Food Safe Degreaser/li>
£16.66 +VAT Add to basket
1/2" gas valve with yellow handle
Gas burner ½BSP valve with yellow handle (fits CKRW and CETUB) (GASV07)
  • Full bore CIM ball valve for gas
  • ½” BSP threaded, Female x Female (inner diameter approx 21 mm)
  • Complete with yellow aluminium lever handle
  • Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
  • Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

Gas equipment fitted with this valve is unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and therefore not CE or UKCA compliant, nor meet Gas Safe current standards. This equipment will be over 25 years old and should be replaced. The exception is Far East CE Turbos which have flame safety and ignition provided electronically.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£27.00 +VAT Add to basket
gas injector jet nozzle cleaning kit
Gas injector jet nozzle cleaning kit (MELEC14)

This kit is specifically designed for cleaning the injector nozzles on vortex style wok burners fitted to wok cookers and other gas appliances.

Inside the metal carry case there are many grooved wires in a variety of widths/diameters. Suitable for all makes and model of wok cooking range, this kit can unblock jets obstructed or constricted by grease build-up to restore performance and flame picture.

£15.00 +VAT Add to basket
1" gas isolation valve
Gas isolation 1″BSP valve with yellow handle (GASV11a)
  • Full bore ball valve for gas
  • 1″ BSP threaded, Female x Female (inner diameter approx 32 mm)
  • Complete with yellow sleeved lever handle
  • Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
  • Supersedes old part GASV11 (1″ CIM isolation valve with aluminium handle) but some pipework adjustment will be necessary as the length is different. The handles are not interchangeable. Alternatively replace the iron pipe for copper and fit a compression valve
  • Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£36.00 +VAT Add to basket
Mini pilot valve with black knob
Gas pilot mini valve with knob ¼” BSP (fits early CKRW) (BURN00D)
  • 1/4″ BSP compression
  • Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£90.00 +VAT Add to basket
1/4" Gas pilot valve with yellow T handle
Gas pilot ¼BSP valve with yellow T handle (fits later CKRW) (GASV61)
  • Full bore CIM ball valve for gas
  • ¼” BSP threaded, Female x Female (inner diameter approx 13 mm)
  • Complete with yellow aluminium lever handle
  • Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
  • Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

Gas equipment fitted with this valve is unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and therefore not CE or UKCA compliant, nor meet Gas Safe current standards. This equipment will likely be over 25 years old and should be replaced.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£17.00 +VAT Add to basket
CE PEL Alphabrass wok burner gas valve (vertical)
Gas safety valve ½BSP (fits CE, CE ECO, CE+ & CEFT, 2002 onwards) (GASVCE7)
  • ½” BSP CE gas valve with FSD function (flame safety device) and pilot control
  • Excludes handle (GASVCE7H) and thermocouple (GASV42)
  • Supplied with horizontal or vertical top loader outlet
  • Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£75.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
Magnetic energiser for 1/2" CE PEL Alphabrass
Magnetic energiser coil for GASVCE7 (GASVCE7E)
  • Fits inside GASVCE7 (1/2” PEL 22S or Alphabrass A62 valve)
  • Please ensure the part you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£25.00 +VAT Add to basket
Pilot cover shield plate in 1.2mm stainless steel
Pilot cover shield (fits 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
  • Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
  • Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
  • All 1.2mm 304 stainless steel construction for longevity
  • Fits most Far East wok cookers built since September 2007 (3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
  • Pilot burners shown in any photos are not included but can be ordered separately
£9.00 +VAT Add to basket
Flexible pilot tube
Pilot flexible tube with olives (FTU)
  • Stainless steel flexible tube used to connect the pilot light burner to the gas valve
  • Suitable to replace copper and bundy tubes used in older cookers
  • 6 mm diameter with a 25 mm neck (some very old cookers will use 4 mm diameter, this will not fit those)
  • Supplied with pair of 6mm compression brass olives
  • If old flexible copper was providing support to the pilot light, an alternative means of support will need to provided

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

 

£14.00£18.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
BUP3 BURN00G BURN00A 3 way pilot light burner
Pilot light 3 way bottom-entry (fits CE, CE Eco, CE+ & CEFT, July 2010 onwards) (BURN00G/A)
  • 3 way pilot, bottom entry (CTB/MV/3/EXT) with integral injectors to suit Far East wok cookers
    • Stainless steel cover (BUPC/BURN001A) in photo is not included, please order separately if required
  • Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
    For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

LPG variants are on long lead times if there is no stock, then BURN001 can be substituted (note BURN001 will not fit copper tubes, if the cooker doesn’t already have stainless tubes you will need FTU01 or FTU03 as well)

 

£19.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
Side-entry adjustable pilot
Pilot light 3 way side-entry adjustable (fits CE, CE Eco, CE+, September 2007-2010) (BURN001)
  • 3 way adjustable pilot, side entry (G04C CTB/U/3/EXT)
  • Stainless steel cover (BURN001A) in photo is not included , please order separately if required
  • Can also be replaced with bottom entry pilot BURN00G/A, flexi tube and 6 mm olive.
  • Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
    For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

 

£19.50 +VAT Add to basket
L-shaped CE pilot light (cover not included)
Pilot Light L-shaped CE (fits CE, 1997-2007) (BURN00BC)

** This item has been permanently discontinued as of March 2019 and no stock remains **

Replace with BURN00G 3 way bottom entry pilot, FTU01/FTU03 stainless flexible tube (cookers without a pilot mounting bracket will require 6 mm copper tube instead to support the pilot)

** This item has been permanently discontinued as of March 2019 and no stock remains**

£16.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
Pilot light L-shaped JM (fits CKRW) (BURN00B)
L shapde pilot pilot
Pilot light L-shaped JM (fits CKRW) (BURN00B)

This item has been permanently discontinued as of February 2020, VERY limited stock remaining

Replace with BURN00G 3 way bottom entry pilot, FTU01/FTU03 stainless flexible tube (cookers without a pilot mounting bracket will require 6 mm copper tube instead to support the pilot)

Wok cookers utilising this pilot light are unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and thus not CE or UKCA compliant, nor meet Gas Safe current standards. This cooker will be over 25 years old and should be replaced.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£16.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
Stainless steel valve handle to fit CE PEL Alphabrass 1/2" gas valve
Stainless steel handle for GASVCE7 (GASVCE7H/GASVCE7SH)
  • Includes hub, handle and grub screw
  • Fits GASVCE7 (½” Gas Safety gas valve, excluding old Junker valves fitted in the late 1990s)
  • Single grub screw, only suitable where handle points over power setting
  • Please ensure the handle you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£18.00 +VAT Add to basket
Stainless steel scrubber for kitchen (box of 6)
Stainless Steel Scrubbers (box of 6)
  • Safe for food use
    • Leaves no harmful metal deposits in the pan
  • Durable
    • Will not splinter in the hand
    • Will not rust or corrode, even when used with chemical solutions
    • Outlasts nylon pads and lasts longer than other metal scrubbers
  • Effective
    • Great for cleaning dried-on or burnt-in food with minimum effort
    • Use in woks, pots and pans (not suitable for non-stick coatings)
    • Use in professional commercial catering or your home’s domestic kitchen

Box of 6 stainless steel scrubbing sponges, hardwearing heavy duty

£6.00 +VAT Add to basket
Thermocouple GASV42 BUCT
Thermocouple flame sensor (GASV42)
  • Universal thermocouple that will fit most wok cooker gas safety valves (CE) with flame safety/supervision device (FSD)
  • 900 mm length
  • Includes union screw and pair of securing nuts

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£16.00 +VAT Add to basket
JP V12 Vortex wok burner (12 gas jets)
V12 vortex gas burner (BURNV12)
  • V12 Vortex burner (these are sometimes erroneously called turbos, but they are atmospheric burners!)
  • Comes complete with inner and outer cast collars plus 12 jets (natural gas as standard, LPG by request)
  • ½” BSP inlet
  • Includes welded mounting bracket to support pilot light and thermocouple as required on Far East wok cookers
    NB: inlet size differs between manufacturers, this burner will replace Far East V12 but we cannot advise on purchases for other cookers, which are at your own risk.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£130.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
JP V21 Vortex wok burner (21 gas jets)
V21 vortex gas burner (BURN20T/BURNV21)
  • V21 Vortex burner (these are sometimes erroneously called turbos, but they are atmospheric burners!)
  • Comes complete with inner and outer cast collars plus 21 jets (natural gas as standard, LPG by request)
  • ½” BSP inlet
  • Includes welded mounting bracket to support pilot light and thermocouple as required on Far East wok cookers
    NB: inlet size differs between manufacturers, this burner will replace Far East V21 but we cannot advise on purchases for other cookers, which are at your own risk.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£152.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
JP1 Spider wok burner (6 gas jets)
V6 JP1 spider ¼” gas burner (BURN13D)

** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.

  • V6 JP1 “Spider” vortex burner which will fit most wok cookers (if not replacing like-for-like, contact the appliance manufacturer first)
  • Comes complete with collar and 6 jets (natural gas as standard, LPG by request)
  • Dimensions ø255×125, ¼” BSP inlet.
    NB: specification differs between manufacturers, this burner will fit Far East cookers but we cannot advise on purchases for other cookers, which are at your own risk.
  • Weight 9.5 kg

** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£83.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
VIP cardboard box takeaway food container
VIP takeaway food container box sizes
VIP takeaway food containers

Click here for sizes and capacities. Select a size for individual photos, dimensions and pricing. Delivery times maybe up to 5 working days. Timed delivery is NOT available online, please call to book, it costs £25+VAT in addition to standard delivery charges.

  • Project a premium quality image, enhance presentation and add value to your food
  • Leakproof and greaseproof
  • Ready to use: All-in-one lid and base
  • Insulating: retains more heat than plastic or aluminium foil containers
  • Microwaveable
  • No sharp edges
  • Keeps freshly fried food crispier for longer
  • Recyclable card packaging is more environmentally friendly
  • Can be folded out to form a serving plate

  • Choice of sizes;
    • big for chow mein, crispy duck and platters
    • small for starters, rice and noodle boxes
    • different container depths can make your portions look more generous
  • Inspired by American Chinese takeout boxes and noodle boxes
  • The original UK card takeaway packaging direct from the manufacturer, accept no imitations!

Click here for sizes and capacities. Select a size below for individual photos, dimensions and pricing. As these goods are kept at an alternative warehouse, delivery times maybe up to 5 working days. Timed delivery is NOT available online, please call to book, it costs £25+VAT in addition to standard delivery charges.

£46.50£57.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
Waste basket (XTRAG)
Waste basket (XTRAG)
  • Perforated mesh strainer with 3mm holes to filter food debris before it enters drainage pipes
  • Carrying handle to assist removal and emptying
  • All 304 stainless steel heavy duty welded construction
  • W88xD355xH97mm, 1.05 kg for Far East CEFT wok cookers built June 2016 onwards:
  • W90xD190xH65mm for all Far East CKRW and CE cookers, plus CEFT wok cookers built before May 2016
  • NB: we cannot advise on compatibility with cookers built by other manufacturers, these purchases are at your own risk. If you need a different size, please e-mail us a drawing and we will quote
£90.00 +VAT Select options This product has multiple variants. The options may be chosen on the product page
Stainless steel waste plug plunger
Waste plug (fits CE Eco, CE+ & CEFT, June 2011 onwards) (XTRAY)
  • Waste plug plunger
  • Swaged stainless steel
  • NB:This part only fits Far East cookers built after June 2011, it is not interchangeable with others. For assistance please send us photographs of you cooker, but we cannot advise on purchases for cookers built by other manufacturers, which are at your own risk.
  • Weight 1.3 kg
£39.00 +VAT Add to basket
Waste plug plunger with neoprene seal
Waste plug (fits CKRW & CE, 2005-2011) (XTRAK)
  • Waste plug plunger with neoprene seal
  • Suits CKRW and CE cookers made before 2011. Does not fit CEFT cookers, see part XTRAY
  • Height may vary
  • Please ensure the part you order will fit your wok cooker, they are not interchangeable. For assistance please send us photographs of you cooker.
£36.00 +VAT Add to basket