Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
Waste basket (XTRAG)
£90.00 +VAT
- Perforated mesh strainer with 3mm holes to filter food debris before it enters drainage pipes
- Carrying handle to assist removal and emptying
- All 304 stainless steel heavy duty welded construction
- W88xD355xH97mm, 1.05 kg for Far East CEFT wok cookers built June 2016 onwards:
- W90xD190xH65mm for all Far East CKRW and CE cookers, plus CEFT wok cookers built before May 2016
- NB: we cannot advise on compatibility with cookers built by other manufacturers, these purchases are at your own risk. If you need a different size, please e-mail us a drawing and we will quote
Related Products
Gas safety valve ½BSP (fits CE, CE ECO, CE+ & CEFT, 2002 onwards) (GASVCE7)
- ½” BSP CE gas valve with FSD function (flame safety device) and pilot control
- Excludes handle (GASVCE7H) and thermocouple (GASV42)
- Supplied with horizontal or vertical top loader outlet
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Magnetic energiser coil for GASVCE7 (GASVCE7E)
- Fits inside GASVCE7 (1/2” PEL 22S or Alphabrass A62 valve)
- Please ensure the part you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
V12 vortex gas burner (BURNV12)
- V12 Vortex burner (these are sometimes erroneously called turbos, but they are atmospheric burners!)
- Comes complete with inner and outer cast collars plus 12 jets (natural gas as standard, LPG by request)
- ½” BSP inlet
- Includes welded mounting bracket to support pilot light and thermocouple as required on Far East wok cookers
NB: inlet size differs between manufacturers, this burner will replace Far East V12 but we cannot advise on purchases for other cookers, which are at your own risk.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot light 3 way side-entry adjustable (fits CE, CE Eco, CE+, September 2007-2010) (BURN001)
- 3 way adjustable pilot, side entry (G04C CTB/U/3/EXT)
- Stainless steel cover (BURN001A) in photo is not included , please order separately if required
- Can also be replaced with bottom entry pilot BURN00G/A, flexi tube and 6 mm olive.
- Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Thermocouple flame sensor (GASV42)
- Universal thermocouple that will fit most wok cooker gas safety valves (CE) with flame safety/supervision device (FSD)
- 900 mm length
- Includes union screw and pair of securing nuts
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
2 bar burner for front rings (BURN07AF)
- Fits older Far East CKRW cookers only with 2 bar manifold fitted
- Dimensions (mm): H40 x W125 x D285
NB: inlet spacing differs between manufacturers, this burner will only fit cookers originally built by Far East, we cannot advise on purchases for other cookers, which are at your own risk and non-refundable. - Weight 1.1 kg
Cast iron wok ring (XTRAO)
- Heavy duty cast iron (special high temperature grade), built to last! Weighs 11.3 kg / 25 lbs
- Universal fit for front rings: suits hole inner diameters between 278 and 305 mm, click here to see dimension drawing
(this covers all Far East standard size front rings, and most other manufacturer’s wok cooking ranges too), which makes it ideal to replace burnt out rings on most wok cookers.
- 330 mm finished diameter, fits woks Ø12″-16″. Projects 70 mm above the resting point on the cooker
- Reduces gas consumption and cooks faster! Cast iron “dual heat” retains heat and spreads it around the wok.
Burner not included
V21 vortex gas burner (BURN20T/BURNV21)
- V21 Vortex burner (these are sometimes erroneously called turbos, but they are atmospheric burners!)
- Comes complete with inner and outer cast collars plus 21 jets (natural gas as standard, LPG by request)
- ½” BSP inlet
- Includes welded mounting bracket to support pilot light and thermocouple as required on Far East wok cookers
NB: inlet size differs between manufacturers, this burner will replace Far East V21 but we cannot advise on purchases for other cookers, which are at your own risk.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.