Water tap 3/8BSP valve (Fits all Far East cookers 1998 onwards) GASV00
£25.00 +VAT
- 3/8″ BSP threaded CIM ball valve for water, Female x Female
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Related Products
V6 JP1 spider ¼” gas burner (BURN13D)
** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.
- V6 JP1 “Spider” vortex burner which will fit most wok cookers (if not replacing like-for-like, contact the appliance manufacturer first)
- Comes complete with collar and 6 jets (natural gas as standard, LPG by request)
- Dimensions ø255×125, ¼” BSP inlet.
NB: specification differs between manufacturers, this burner will fit Far East cookers but we cannot advise on purchases for other cookers, which are at your own risk. - Weight 9.5 kg
** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Gas burner ½BSP valve with yellow handle (fits CKRW and CETUB) (GASV07)
- Full bore CIM ball valve for gas
- ½” BSP threaded, Female x Female (inner diameter approx 21 mm)
- Complete with yellow aluminium lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Gas equipment fitted with this valve is unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and therefore not CE or UKCA compliant, nor meet Gas Safe current standards. This equipment will be over 25 years old and should be replaced. The exception is Far East CE Turbos which have flame safety and ignition provided electronically.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Thermocouple flame sensor (GASV42)
- Universal thermocouple that will fit most wok cooker gas safety valves (CE) with flame safety/supervision device (FSD)
- 900 mm length
- Includes union screw and pair of securing nuts
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
2 bar burner for front rings (BURN07AF)
- Fits older Far East CKRW cookers only with 2 bar manifold fitted
- Dimensions (mm): H40 x W125 x D285
NB: inlet spacing differs between manufacturers, this burner will only fit cookers originally built by Far East, we cannot advise on purchases for other cookers, which are at your own risk and non-refundable. - Weight 1.1 kg
Gas injector jet nozzle cleaning kit (MELEC14)
This kit is specifically designed for cleaning the injector nozzles on vortex style wok burners fitted to wok cookers and other gas appliances.
Inside the metal carry case there are many grooved wires in a variety of widths/diameters. Suitable for all makes and model of wok cooking range, this kit can unblock jets obstructed or constricted by grease build-up to restore performance and flame picture.
Gas pilot mini valve with knob ¼” BSP (fits early CKRW) (BURN00D)
- 1/4″ BSP compression
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
3 bar burner (BURN08/A)
- Fits most Far East wok cookers (CKRW, CE, CEFT) with 3 bar manifold fitted
- Suitable replacement for discontinued Black Teknigas bar burners
- 304 stainless steel
- Dimensions (mm): H40 x W160 x D285.
NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, which are at your own risk. Burners that look the same may have different spacing - Weight 1.3 kg
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot light 3 way side-entry adjustable (fits CE, CE Eco, CE+, September 2007-2010) (BURN001)
- 3 way adjustable pilot, side entry (G04C CTB/U/3/EXT)
- Stainless steel cover (BURN001A) in photo is not included , please order separately if required
- Can also be replaced with bottom entry pilot BURN00G/A, flexi tube and 6 mm olive.
- Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.