2 bar wok burner for rear rings
2 bar burner (BURN07A)
  • Fits all Far East wok cooker rear rings (CKRW, CE, CEFT)
  • Suitable replacement for discontinued Black Teknigas bar burners
  • Dimensions (mm): H40 x W100 x D285.
    NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, which are at your own risk.
  • Weight 0.9 kg

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£77.00£107.00 +VAT Select options
2 bar wok burner for front rings
2 bar burner for front rings (BURNxx)
  • Fits older Far East CKRW cookers only with 2 bar manifold fitted
  • Dimensions (mm): H40 x W125 x D285
    NB: inlet spacing differs between manufacturers, this burner will only fit cookers originally built by Far East, we cannot advise on purchases for other cookers, which are at your own risk and non-refundable.
  • Weight 1.1 kg
£107.00 +VAT Add to basket
3 bar wok burner
3 bar burner (BURN08A)

 

  • Fits most Far East wok cookers (CKRW, CE, CEFT) with 3 bar manifold fitted
  • Dimensions (mm): H40 x W160 x D285.
    NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, which are at your own risk.
  • Weight 1.3 kg

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

 

£92.00£129.00 +VAT Select options
XTRAO cast iron wok ring (showing turbo burner)
Cast iron ring (XTRAO)
Cast iron ring (XTRAO)
  • Heavy duty cast iron (special high temperature grade), built to last! Weighs 11.3 kg / 25 lbs
  • Fits hole inner diameters between 278 and 305 mm, click here to see dimension drawing
    (this covers all Far East standard size front rings, and most other manufacturer’s wok cooking ranges too), which makes it ideal to replace burnt out rings on most wok cookers.
  • 330 mm finished diameter, fits woks Ø12″-16″. Projects 70 mm above the resting point on the cooker
  • Reduces gas consumption and cooks faster! Cast iron “dual heat” retains heat and spreads it around the wok.

Burner not included

£190.00 +VAT Add to basket
Conversion socket (Junker to CE PEL Alphabrass
Junker valve (discontinued)
Conversion socket for GASVCE7 to replace ½BSP CE Junker valve (CE 1998 onwards) (CONVSKT)
    • Allows GASVCE7 valve to replace discontinued Junker ½” CE valve on Far East CE cookers
    • Conversion socket only (valve and handle available separately) Please ensure the valve you order will fit your wok cooking range, they are not interchangeable (we are unable to advise suitability for cookers not manufactured by Far East, purchases are at your own risk). For assistance please send us photographs of you cooker. IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£10.00 +VAT Add to basket
1/2" gas valve with yellow handle
Gas burner ½BSP valve with yellow handle (fits CKRW) (GASV07)
  • Full bore CIM ball valve for gas
  • ½” BSP threaded, Female x Female (inner diameter approx 21 mm)
  • Complete with yellow aluminium lever handle
  • Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
  • Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£20.00 +VAT Add to basket
1" gas isolation valve
Gas isolation 1″BSP valve with yellow handle (GASV11a)
  • Full bore ball valve for gas
  • 1″ BSP threaded, Female x Female (inner diameter approx 32 mm)
  • Complete with yellow sleeved lever handle
  • Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
  • Supersedes old part GASV11 (1″ CIM isolation valve with aluminium handle) but some pipework adjustment may be necessary and the handles are not interchangeable
  • Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£35.79 +VAT Read more
Mini pilot valve with black knob
Gas pilot mini valve with knob ¼” BSP (fits early CKRW) (BURN00D)
  • 1/4″ BSP compression
  • Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£90.00 +VAT Add to basket
1/4" Gas pilot valve with yellow T handle
Gas pilot ¼BSP valve with yellow T handle (fits later CKRW) (GASV61A)
  • Full bore CIM ball valve for gas
  • ¼” BSP threaded, Female x Female (inner diameter approx 13 mm)
  • Complete with yellow aluminium lever handle
  • Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
  • Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£17.00 +VAT Add to basket
CE PEL Alphabrass wok burner gas valve (vertical)
Gas safety valve ½BSP (fits CE, CE ECO, CE+ & CEFT, 2002 onwards) (GASVCE7)
  • ½” BSP CE gas valve with FSD function (flame safety device) and pilot control
  • Excludes handle (GASVCE7H) and thermocouple (GASV42)
  • Supplied with horizontal or vertical top loader outlet
  • Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£65.00 +VAT Select options
Magnetic energiser for 1/2" CE PEL Alphabrass
Magnetic energiser assembly for GASVCE7 (GASVCE7E)
  • Fits inside GASVCE7 (1/2” PEL 22S or Alphabrass A62 valve)
  • Please ensure the part you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£20.85 +VAT Add to basket
Pilot cover shield plate in 1.2mm stainless steel
Pilot cover shield (fits mushroom 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
  • Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
  • Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
  • All 1.2mm stainless steel construction
  • Fits most Far East wok cookers built since September 2007 (mushroom head 3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
  • Pilot burners shown in any photos are not included but can be ordered separately

 

£8.00 +VAT Add to basket
Flexible pilot tube
Pilot flexible tube with olives (FTU)
  • Stainless steel flexible tube used to connect the pilot light burner to the gas valve
  • Suitable to replace copper and bundy tubes used in older cookers
  • 6 mm diameter with a 25 mm neck (some very old cookers will use 4 mm diameter, this will not fit those)
  • Supplied with pair of 6mm compression brass olives

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

 

£9.00£15.00 +VAT Select options
Bottom entry pilot (cover not included)
Pilot light 3 way bottom-entry (fits CE, CE Eco, CE+ & CEFT, July 2010 onwards) (BURN00G/A)
  • CTB/MV/3/EXT aka 3 way pilot
  • Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
    For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
  • Stainless steel cover (BURN001A) in photo is not included, please order separately if required

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

LPG version no stock until October, BURN001 can be substituted (note BURN001 will not fit copper tubes, if the cooker doesn’t already have stainless tubes you will need FTU01 or FTU03 as well)

 

£16.00 +VAT Select options
Side-entry adjustable pilot
Pilot light 3 way side-entry adjustable (fits CE, CE Eco, CE+, September 2007-2010) (BURN001)
  • G04C CTB/U/3/EXT aka 3 way adjustable pilot
  • Stainless steel cover (BURN001A) in photo is
      not included

    , please order separately if required

  • Can also be replaced with bottom entry pilot BURN00G/A, flexi tube and 6 mm olive.
  • Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
    For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

 

£25.00 +VAT Add to basket
L-shaped CE pilot light (cover not included)
Pilot Light L-shaped CE (fits CE, 1997-2007) (BURN00BC)

** This item has been permanently discontinued **

  • Please ensure the pilot you order will fit your wok cooker, they are not interchangeable.
  • Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
    For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
  • Stainless steel cover in photo is not included

** This item has been permanently discontinued **

Replace with BURN00G 3 way bottom entry pilot, FTU01/FTU03 stainless flexible tube (cookers without a pilot mounting bracket will require 6 mm copper tube instead to support the pilot)

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

 

£16.00 +VAT Select options
L shapde pilot pilot
Pilot light L-shaped JM (fits CKRW) (BURN00B)

** This item has been permanently discontinued, VERY limited stock remaining **

  • Please ensure the pilot you order will fit your wok cooker, they are not interchangeable.
  • Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
    For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).

** This item has been permanently discontinued, VERY limited stock remaining **

Replace with BURN00G 3 way bottom entry pilot, FTU01/FTU03 stainless flexible tube (cookers without a pilot mounting bracket will require 6 mm copper tube instead to support the pilot)

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£16.00 +VAT Select options
Stainless steel valve handle to fit CE PEL Alphabrass 1/2" gas valve
Stainless steel handle for GASVCE7 (GASVCE7SH)
  • Includes hub, handle and grub screw
  • Fits GASVCE7 (½” BSP CE gas valve, excluding old Junker valves fitted in the late 1990s)
  • Please ensure the handle you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£7.00 +VAT Add to basket
Thermocouple
Thermocouple flame sensor (GASV42)
  • Universal thermocouple that will fit most wok cooker CE gas valves
  • 900 mm length
  • Includes split-nut union screws and a collet

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£14.00 +VAT Add to basket
JP V12 Vortex wok burner (12 gas jets)
V12 vortex gas burner (BURNV12)
  • V12 Vortex burner
  • Comes complete with inner and outer collar plus 12 jets (natural gas as standard, LPG by request)
  • ½” BSP inlet.
    NB: inlet size differs between manufacturers, this burner will replace Far East V12 but we cannot advise on purchases for other cookers, which are at your own risk.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£101.00 +VAT Select options
JP V21 Vortex wok burner (21 gas jets)
V21 vortex gas burner (BURNV21)
  • V21 Vortex burner
  • Comes complete with inner and outer collar plus 21 jets (natural gas as standard, LPG by request)
  • ½” BSP inlet.
    NB: inlet size differs between manufacturers, this burner will replace Far East V21 but we cannot advise on purchases for other cookers, which are at your own risk.

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£101.00 +VAT Select options
JP1 Spider wok burner (6 gas jets)
V6 JP1 spider gas burner (BURN13D)
  • V6 JP1 “Spider” vortex burner which will fit most wok cookers (if not replacing like-for-like, contact the appliance manufacturer first)
  • Comes complete with collar and 6 jets (natural gas as standard, LPG by request)
  • Dimensions ø255×125, ¼” BSP inlet.
    NB: specification differs between manufacturers, this burner will fit Far East cookers but we cannot advise on purchases for other cookers, which are at your own risk.
  • Weight 7.5 kg

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£77.00 +VAT Select options
Stainless steel waste plug plunger
Waste plug (Fits CE Eco, CE+ & CEFT, June 2011 onwards) (XTRAY)
  • Waste plug plunger
  • Swaged stainless steel
  • NB:This part only fits Far East cookers built after June 2011, it is not interchangeable with others. For assistance please send us photographs of you cooker, but we cannot advise on purchases for cookers built by other manufacturers, which are at your own risk.
  • Weight 1.3 kg
£28.57 +VAT Add to basket
Waste plug plunger with neoprene seal
Waste plug (fits CKRW & CE, 2005-2011) (XTRAK)
  • Waste plug plunger with neoprene seal
  • Suits CKRW and CE cookers made before 2011. Does not fit CEFT cookers, see part XTRAY
  • Height may vary
  • Please ensure the part you order will fit your wok cooker, they are not interchangeable. For assistance please send us photographs of you cooker.
£21.05 +VAT Add to basket
3/8" water tap valve with red handle
Water tap 3/8BSP valve (Fits CKRW 1998 onwards) GASV00
  • 3/8″ BSP threaded, Female x Female
  • Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
£13.00 +VAT Add to basket
Yellow handle for 1/2" valve
Yellow handle to fit GASV07 ½BSP gas valve (fits CKRW) (GASV07H)
  • Please ensure the handle will fit the valve, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).

All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.

£6.00 +VAT Add to basket