Pilot light 3 way side-entry adjustable (fits CE, CE Eco, CE+, September 2007-2010) (BURN001)
£19.50 +VAT
- 3 way adjustable pilot, side entry (G04C CTB/U/3/EXT)
- Stainless steel cover (BURN001A) in photo is not included , please order separately if required
- Can also be replaced with bottom entry pilot BURN00G/A, flexi tube and 6 mm olive.
- Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Related Products
Gas pilot ¼BSP valve with yellow T handle (fits later CKRW) (GASV61)
- Full bore CIM ball valve for gas
- ¼” BSP threaded, Female x Female (inner diameter approx 13 mm)
- Complete with yellow aluminium lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Gas equipment fitted with this valve is unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and therefore not CE or UKCA compliant, nor meet Gas Safe current standards. This equipment will likely be over 25 years old and should be replaced.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Waste plug (fits CKRW & CE, 2005-2011) (XTRAK)
- Waste plug plunger with neoprene seal
- Suits CKRW and CE cookers made before 2011. Does not fit CEFT cookers, see part XTRAY
- Height may vary
- Please ensure the part you order will fit your wok cooker, they are not interchangeable. For assistance please send us photographs of you cooker.
Stainless steel handle for GASVCE7 (GASVCE7H/GASVCE7SH)
- Includes hub, handle and grub screw
- Fits GASVCE7 (½” Gas Safety gas valve, excluding old Junker valves fitted in the late 1990s)
- Single grub screw, only suitable where handle points over power setting
- Please ensure the handle you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Gas safety valve ½BSP (fits CE, CE ECO, CE+ & CEFT, 2002 onwards) (GASVCE7)
- ½” BSP CE gas valve with FSD function (flame safety device) and pilot control
- Excludes handle (GASVCE7H) and thermocouple (GASV42)
- Supplied with horizontal or vertical top loader outlet
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Water tap 3/8BSP valve (Fits all Far East cookers 1998 onwards) GASV00
- 3/8″ BSP threaded CIM ball valve for water, Female x Female
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Pilot cover shield (fits 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
- Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
- Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
- All 1.2mm 304 stainless steel construction for longevity
- Fits most Far East wok cookers built since September 2007 (3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
- Pilot burners shown in any photos are not included but can be ordered separately
Waste plug (fits CE Eco, CE+ & CEFT, June 2011 onwards) (XTRAY)
- Waste plug plunger
- Swaged stainless steel
- NB:This part only fits Far East cookers built after June 2011, it is not interchangeable with others. For assistance please send us photographs of you cooker, but we cannot advise on purchases for cookers built by other manufacturers, which are at your own risk.
- Weight 1.3 kg
Magnetic energiser coil for GASVCE7 (GASVCE7E)
- Fits inside GASVCE7 (1/2” PEL 22S or Alphabrass A62 valve)
- Please ensure the part you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.