Far East Fat Fryer Cleaner (5 kg)

• Steamer descaling powder (food grade) in 2.5 kg tub
• Especially formulated for use with Far East CEST steamer but can be used with any steamer stainless steel tank
• Recommend use once per month to remove limescale build up and calcium deposits.
  • Extend the steamer tank life, improve steam generation efficiency and reduce gas consumption.
• Use 1 tub per steamer tank (no measuring necessary)
  • Add powder, fill tank with water, heat up, then turn off, cover and leave overnight.
  • In the morning, drain descaling solution and rinse thoroughly. Some scrubbing maybe necessary for heavy scaling.

[1] ŒFlush tank with hot water. [2] Add descaling powder (50g per litre of water. That’s 1 tub for a 40L steamer tank. Double the dose for heavy scale). [3]ŽRefill tank with water to normal operating level. [4]Switch on steamer and heat the water until very hot, but not boiling (as it may overflow). If possible, operate steamer without tank cover [5]Once water is hot, switch the steamer off. If powder has not completely dissolved, agitate water with a suitable implement, avoiding splashing. Cover tank and leave over night. ‘[6]After 8+ hours, drain the tank and flush thoroughly with cold water. For heavy scaling, after rinsing it may be necessary to scrub the tank interior with a stiff bristled brush to loosen remaining scale.  [7]’ Refill steamer with water and heat to normal working temperature, then drain to remove all traces of the descaling solution

Do NOT mix with bleach or other chemicals, this may cause noxious fumes! Avoid contact with skin and wash hands thoroughly after handling. Keep out of reach of children. Contains food grade citric acid (FFC6, E330)

Irritant: Causes serious eye irritation. Wear eye/face protection.   IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.         If eye irritation persists: Get medical advice/attention

1 蒸爐水槽加熱水
2 加除垢粉(50g 1公升水)1桶40公升水
3 加水到正常水位
4 加熱(不要沸)
5 水熱後關掉煤氣, 檢查所有除垢粉都溶化, 浸過夜。
6 排掉所有水在槽中，確定所有除垢粉都清洗去。太重垢可能要擦法。
7 加水到正常水位,加熱,排掉所有水在槽中

不可以加其他化學劑一同使用!