Yellow handle to fit GASV07 ½BSP gas valve (fits CKRW) (GASV07H)
£9.00 +VAT
** Handles are no longer available to purchase separately as of August 2023, see GASV07 for the valve with handle **
- Please ensure the handle will fit the valve, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
** Handles are no longer available to purchase separately as of August 2023, see GASV07 for the valve with handle **
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Out of stock
Related Products
Water tap 3/8BSP valve (Fits all Far East cookers 1998 onwards) GASV00
- 3/8″ BSP threaded CIM ball valve for water, Female x Female
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Gas isolation 1″BSP valve with yellow handle (GASV11a)
- Full bore ball valve for gas
- 1″ BSP threaded, Female x Female (inner diameter approx 32 mm)
- Complete with yellow sleeved lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Supersedes old part GASV11 (1″ CIM isolation valve with aluminium handle) but some pipework adjustment will be necessary as the length is different. The handles are not interchangeable. Alternatively replace the iron pipe for copper and fit a compression valve
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
2 bar burner (BURN07/A)
- Fits all Far East wok cooker rear rings (CKRW, CE, CEFT)
- Suitable replacement for discontinued Black Teknigas bar burners
- 304 stainless steel
- Dimensions (mm): H40 x W100 x D285.
NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, wh
ich are at your own risk. Burners that look the same may have different spacing - Weight 0.9 kg
- Custom spaced bar burners (G31 style) are available for email and phone order from £152+VAT
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Waste basket (XTRAG)
- Perforated mesh strainer with 3mm holes to filter food debris before it enters drainage pipes
- Carrying handle to assist removal and emptying
- All 304 stainless steel heavy duty welded construction
- W88xD355xH97mm, 1.05 kg for Far East CEFT wok cookers built June 2016 onwards:
- W90xD190xH65mm for all Far East CKRW and CE cookers, plus CEFT wok cookers built before May 2016
- NB: we cannot advise on compatibility with cookers built by other manufacturers, these purchases are at your own risk. If you need a different size, please e-mail us a drawing and we will quote
Stainless steel handle for GASVCE7 (GASVCE7H/GASVCE7SH)
- Includes hub, handle and grub screw
- Fits GASVCE7 (½” Gas Safety gas valve, excluding old Junker valves fitted in the late 1990s)
- Single grub screw, only suitable where handle points over power setting
- Please ensure the handle you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot flexible tube with olives (FTU)
- Stainless steel flexible tube used to connect the pilot light burner to the gas valve
- Suitable to replace copper and bundy tubes used in older cookers
- 6 mm diameter with a 25 mm neck (some very old cookers will use 4 mm diameter, this will not fit those)
- Supplied with pair of 6mm compression brass olives
- If old flexible copper was providing support to the pilot light, an alternative means of support will need to provided
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Gas safety valve ½BSP (fits CE, CE ECO, CE+ & CEFT, 2002 onwards) (GASVCE7)
- ½” BSP CE gas valve with FSD function (flame safety device) and pilot control
- Excludes handle (GASVCE7H) and thermocouple (GASV42)
- Supplied with horizontal or vertical top loader outlet
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot cover shield (fits 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
- Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
- Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
- All 1.2mm 304 stainless steel construction for longevity
- Fits most Far East wok cookers built since September 2007 (3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
- Pilot burners shown in any photos are not included but can be ordered separately