Pilot light L-shaped JM (fits CKRW) (BURN00B)
£32.00 +VAT
This item has been permanently discontinued as of February 2020, VERY limited stock remaining
McLaren products 27A5H2M-7215 S1X (27A5H2M 17)
Replace with BURN00G 3 way bottom entry pilot, FTU01/FTU03 stainless flexible tube (cookers without a pilot mounting bracket will require 6 mm copper tube instead to support the pilot)
Wok cookers utilising this pilot light are unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and thus not CE or UKCA compliant, nor meet Gas Safe current standards. This cooker will be over 25 years old and should be replaced.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Only 2 left in stock
Related Products
Stainless steel handle for GASVCE7 (GASVCE7H/GASVCE7SH)
- Includes hub, handle and grub screw
- Fits GASVCE7 (½” Gas Safety gas valve, excluding old Junker valves fitted in the late 1990s)
- Single grub screw, only suitable where handle points over power setting
- Please ensure the handle you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
2 bar burner for front rings (BURN07AF)
- Fits older Far East CKRW cookers only with 2 bar manifold fitted
- Dimensions (mm): H40 x W125 x D285
NB: inlet spacing differs between manufacturers, this burner will only fit cookers originally built by Far East, we cannot advise on purchases for other cookers, which are at your own risk and non-refundable. - Weight 1.1 kg
V12 vortex gas burner (BURNV12)
- V12 Vortex burner (these are sometimes erroneously called turbos, but they are atmospheric burners!)
- Comes complete with inner and outer cast collars plus 12 jets (natural gas as standard, LPG by request)
- ½” BSP inlet
- Includes welded mounting bracket to support pilot light and thermocouple as required on Far East wok cookers
NB: inlet size differs between manufacturers, this burner will replace Far East V12 but we cannot advise on purchases for other cookers, which are at your own risk.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Gas isolation 1″BSP valve with yellow handle (GASV11a)
- Full bore ball valve for gas
- 1″ BSP threaded, Female x Female (inner diameter approx 32 mm)
- Complete with yellow sleeved lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Supersedes old part GASV11 (1″ CIM isolation valve with aluminium handle) but some pipework adjustment will be necessary as the length is different. The handles are not interchangeable. Alternatively replace the iron pipe for copper and fit a compression valve
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Cast iron wok ring (XTRAO)
- Heavy duty cast iron (special high temperature grade), built to last! Weighs 11.3 kg / 25 lbs
- Universal fit for front rings: suits hole inner diameters between 278 and 305 mm, click here to see dimension drawing
(this covers all Far East standard size front rings, and most other manufacturer’s wok cooking ranges too), which makes it ideal to replace burnt out rings on most wok cookers.
- 330 mm finished diameter, fits woks Ø12″-16″. Projects 70 mm above the resting point on the cooker
- Reduces gas consumption and cooks faster! Cast iron “dual heat” retains heat and spreads it around the wok.
Burner not included
3 bar burner (BURN08/A)
- Fits most Far East wok cookers (CKRW, CE, CEFT) with 3 bar manifold fitted
- Suitable replacement for discontinued Black Teknigas bar burners
- 304 stainless steel
- Dimensions (mm): H40 x W160 x D285.
NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, which are at your own risk. Burners that look the same may have different spacing - Weight 1.3 kg
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot cover shield (fits 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
- Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
- Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
- All 1.2mm 304 stainless steel construction for longevity
- Fits most Far East wok cookers built since September 2007 (3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
- Pilot burners shown in any photos are not included but can be ordered separately
Yellow handle to fit GASV07 ½BSP gas valve (fits CKRW) (GASV07H)
** Handles are no longer available to purchase separately as of August 2023, see GASV07 for the valve with handle **
- Please ensure the handle will fit the valve, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
** Handles are no longer available to purchase separately as of August 2023, see GASV07 for the valve with handle **
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.