Additional information
| Fuel | Natural Gas (G20/G25), LPG (G31, 37 mbar) |
|---|
- You cannot add "Yellow handle to fit GASV07 ½BSP gas valve (fits CKRW) (GASV07H)" to the basket because the product is out of stock.
Pilot light 3 way bottom-entry (fits CE, CE Eco, CE+ & CEFT, July 2010 onwards) (BURN00G/A)
£19.00 +VAT
- 3 way pilot, bottom entry (CTB/MV/3/EXT) with integral injectors to suit Far East wok cookers
- Stainless steel cover (BUPC/BURN001A) in photo is not included, please order separately if required
- Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
LPG variants are on long lead times if there is no stock, then BURN001 can be substituted (note BURN001 will not fit copper tubes, if the cooker doesn’t already have stainless tubes you will need FTU01 or FTU03 as well)
Related Products
Gas isolation 1″BSP valve with yellow handle (GASV11a)
- Full bore ball valve for gas
- 1″ BSP threaded, Female x Female (inner diameter approx 32 mm)
- Complete with yellow sleeved lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Supersedes old part GASV11 (1″ CIM isolation valve with aluminium handle) but some pipework adjustment will be necessary as the length is different. The handles are not interchangeable. Alternatively replace the iron pipe for copper and fit a compression valve
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
3 bar burner (BURN08/A)
- Fits most Far East wok cookers (CKRW, CE, CEFT) with 3 bar manifold fitted
- Suitable replacement for discontinued Black Teknigas bar burners
- 304 stainless steel
- Dimensions (mm): H40 x W160 x D285.
NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, which are at your own risk. Burners that look the same may have different spacing - Weight 1.3 kg
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Water tap 3/8BSP valve (Fits all Far East cookers 1998 onwards) GASV00
- 3/8″ BSP threaded CIM ball valve for water, Female x Female
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Pilot light 3 way side-entry adjustable (fits CE, CE Eco, CE+, September 2007-2010) (BURN001)
- 3 way adjustable pilot, side entry (G04C CTB/U/3/EXT)
- Stainless steel cover (BURN001A) in photo is not included , please order separately if required
- Can also be replaced with bottom entry pilot BURN00G/A, flexi tube and 6 mm olive.
- Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
2 bar burner (BURN07/A)
- Fits all Far East wok cooker rear rings (CKRW, CE, CEFT)
- Suitable replacement for discontinued Black Teknigas bar burners
- 304 stainless steel
- Dimensions (mm): H40 x W100 x D285.
NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, wh
ich are at your own risk. Burners that look the same may have different spacing - Weight 0.9 kg
- Custom spaced bar burners (G31 style) are available for email and phone order from £152+VAT
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Magnetic energiser coil for GASVCE7 (GASVCE7E)
- Fits inside GASVCE7 (1/2” PEL 22S or Alphabrass A62 valve)
- Please ensure the part you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Cast iron wok ring (XTRAO)
- Heavy duty cast iron (special high temperature grade), built to last! Weighs 11.3 kg / 25 lbs
- Universal fit for front rings: suits hole inner diameters between 278 and 305 mm, click here to see dimension drawing
(this covers all Far East standard size front rings, and most other manufacturer’s wok cooking ranges too), which makes it ideal to replace burnt out rings on most wok cookers.
- 330 mm finished diameter, fits woks Ø12″-16″. Projects 70 mm above the resting point on the cooker
- Reduces gas consumption and cooks faster! Cast iron “dual heat” retains heat and spreads it around the wok.
Burner not included
Waste plug (fits CE Eco, CE+ & CEFT, June 2011 onwards) (XTRAY)
- Waste plug plunger
- Swaged stainless steel
- NB:This part only fits Far East cookers built after June 2011, it is not interchangeable with others. For assistance please send us photographs of you cooker, but we cannot advise on purchases for cookers built by other manufacturers, which are at your own risk.
- Weight 1.3 kg