Yellow handle to fit GASV07 ½BSP gas valve (fits CKRW) (GASV07H)
£9.00 +VAT
** Handles are no longer available to purchase separately as of August 2023, see GASV07 for the valve with handle **
- Please ensure the handle will fit the valve, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
** Handles are no longer available to purchase separately as of August 2023, see GASV07 for the valve with handle **
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Out of stock
Related Products
Thermocouple flame sensor (GASV42)
- Universal thermocouple that will fit most wok cooker gas safety valves (CE) with flame safety/supervision device (FSD)
- 900 mm length
- Includes union screw and pair of securing nuts
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot Light L-shaped CE (fits CE, 1997-2007) (BURN00BC)
** This item has been permanently discontinued as of March 2019 and no stock remains **
Replace with BURN00G 3 way bottom entry pilot, FTU01/FTU03 stainless flexible tube (cookers without a pilot mounting bracket will require 6 mm copper tube instead to support the pilot)
** This item has been permanently discontinued as of March 2019 and no stock remains**
Waste plug (fits CE Eco, CE+ & CEFT, June 2011 onwards) (XTRAY)
- Waste plug plunger
- Swaged stainless steel
- NB:This part only fits Far East cookers built after June 2011, it is not interchangeable with others. For assistance please send us photographs of you cooker, but we cannot advise on purchases for cookers built by other manufacturers, which are at your own risk.
- Weight 1.3 kg
Pilot light 3 way bottom-entry (fits CE, CE Eco, CE+ & CEFT, July 2010 onwards) (BURN00G/A)
- 3 way pilot, bottom entry (CTB/MV/3/EXT) with integral injectors to suit Far East wok cookers
- Stainless steel cover (BUPC/BURN001A) in photo is not included, please order separately if required
- Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
LPG variants are on long lead times if there is no stock, then BURN001 can be substituted (note BURN001 will not fit copper tubes, if the cooker doesn’t already have stainless tubes you will need FTU01 or FTU03 as well)
Pilot cover shield (fits 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
- Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
- Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
- All 1.2mm 304 stainless steel construction for longevity
- Fits most Far East wok cookers built since September 2007 (3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
- Pilot burners shown in any photos are not included but can be ordered separately
Cast iron wok ring (XTRAO)
- Heavy duty cast iron (special high temperature grade), built to last! Weighs 11.3 kg / 25 lbs
- Universal fit for front rings: suits hole inner diameters between 278 and 305 mm, click here to see dimension drawing
(this covers all Far East standard size front rings, and most other manufacturer’s wok cooking ranges too), which makes it ideal to replace burnt out rings on most wok cookers.
- 330 mm finished diameter, fits woks Ø12″-16″. Projects 70 mm above the resting point on the cooker
- Reduces gas consumption and cooks faster! Cast iron “dual heat” retains heat and spreads it around the wok.
Burner not included
Waste basket (XTRAG)
- Perforated mesh strainer with 3mm holes to filter food debris before it enters drainage pipes
- Carrying handle to assist removal and emptying
- All 304 stainless steel heavy duty welded construction
- W88xD355xH97mm, 1.05 kg for Far East CEFT wok cookers built June 2016 onwards:
- W90xD190xH65mm for all Far East CKRW and CE cookers, plus CEFT wok cookers built before May 2016
- NB: we cannot advise on compatibility with cookers built by other manufacturers, these purchases are at your own risk. If you need a different size, please e-mail us a drawing and we will quote
Gas isolation 1″BSP valve with yellow handle (GASV11a)
- Full bore ball valve for gas
- 1″ BSP threaded, Female x Female (inner diameter approx 32 mm)
- Complete with yellow sleeved lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Supersedes old part GASV11 (1″ CIM isolation valve with aluminium handle) but some pipework adjustment will be necessary as the length is different. The handles are not interchangeable. Alternatively replace the iron pipe for copper and fit a compression valve
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.