Gas isolation 1″BSP valve with yellow handle (GASV11a)
£36.00 +VAT
- Full bore ball valve for gas
- 1″ BSP threaded, Female x Female (inner diameter approx 32 mm)
- Complete with yellow sleeved lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Supersedes old part GASV11 (1″ CIM isolation valve with aluminium handle) but some pipework adjustment will be necessary as the length is different. The handles are not interchangeable. Alternatively replace the iron pipe for copper and fit a compression valve
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Related Products
V6 JP1 spider ¼” gas burner (BURN13D)
** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.
- V6 JP1 “Spider” vortex burner which will fit most wok cookers (if not replacing like-for-like, contact the appliance manufacturer first)
- Comes complete with collar and 6 jets (natural gas as standard, LPG by request)
- Dimensions ø255×125, ¼” BSP inlet.
NB: specification differs between manufacturers, this burner will fit Far East cookers but we cannot advise on purchases for other cookers, which are at your own risk. - Weight 9.5 kg
** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot cover shield (fits 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
- Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
- Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
- All 1.2mm 304 stainless steel construction for longevity
- Fits most Far East wok cookers built since September 2007 (3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
- Pilot burners shown in any photos are not included but can be ordered separately
V12 vortex gas burner (BURNV12)
- V12 Vortex burner (these are sometimes erroneously called turbos, but they are atmospheric burners!)
- Comes complete with inner and outer cast collars plus 12 jets (natural gas as standard, LPG by request)
- ½” BSP inlet
- Includes welded mounting bracket to support pilot light and thermocouple as required on Far East wok cookers
NB: inlet size differs between manufacturers, this burner will replace Far East V12 but we cannot advise on purchases for other cookers, which are at your own risk.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Yellow handle to fit GASV07 ½BSP gas valve (fits CKRW) (GASV07H)
** Handles are no longer available to purchase separately as of August 2023, see GASV07 for the valve with handle **
- Please ensure the handle will fit the valve, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
** Handles are no longer available to purchase separately as of August 2023, see GASV07 for the valve with handle **
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Stainless steel handle for GASVCE7 (GASVCE7H/GASVCE7SH)
- Includes hub, handle and grub screw
- Fits GASVCE7 (½” Gas Safety gas valve, excluding old Junker valves fitted in the late 1990s)
- Single grub screw, only suitable where handle points over power setting
- Please ensure the handle you order will fit your gas valve, they are not interchangeable. For assistance please send us photographs of you cooker.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot Light L-shaped CE (fits CE, 1997-2007) (BURN00BC)
** This item has been permanently discontinued as of March 2019 and no stock remains **
Replace with BURN00G 3 way bottom entry pilot, FTU01/FTU03 stainless flexible tube (cookers without a pilot mounting bracket will require 6 mm copper tube instead to support the pilot)
** This item has been permanently discontinued as of March 2019 and no stock remains**
Gas burner ½BSP valve with yellow handle (fits CKRW and CETUB) (GASV07)
- Full bore CIM ball valve for gas
- ½” BSP threaded, Female x Female (inner diameter approx 21 mm)
- Complete with yellow aluminium lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Gas equipment fitted with this valve is unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and is not CE or UKCA compliant, nor does it meet Gas Safe current standards. This equipment will be over 25 years old and should be replaced. The exception is Far East CE Turbos which have flame safety and ignition provided electronically.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Gas pilot ¼BSP valve with yellow T handle (fits later CKRW) (GASV61)
- Full bore CIM ball valve for gas
- ¼” BSP threaded, Female x Female (inner diameter approx 13 mm)
- Complete with yellow aluminium lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.