Only logged in customers who have purchased this product may leave a review.
Gas injector jet nozzle cleaning kit (MELEC14)
£15.00 +VAT
This kit is specifically designed for cleaning the injector nozzles on vortex style wok burners fitted to wok cookers and other gas appliances.
Inside the metal carry case there are many grooved wires in a variety of widths/diameters. Suitable for all makes and model of wok cooking range, this kit can unblock jets obstructed or constricted by grease build-up to restore performance and flame picture.
Related Products
Gas pilot ¼BSP valve with yellow T handle (fits later CKRW) (GASV61)
- Full bore CIM ball valve for gas
- ¼” BSP threaded, Female x Female (inner diameter approx 13 mm)
- Complete with yellow aluminium lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Gas equipment fitted with this valve is unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and therefore not CE or UKCA compliant, nor meet Gas Safe current standards. This equipment will likely be over 25 years old and should be replaced.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Gas safety valve ½BSP (fits CE, CE ECO, CE+ & CEFT, 2002 onwards) (GASVCE7)
- ½” BSP CE gas valve with FSD function (flame safety device) and pilot control
- Excludes handle (GASVCE7H) and thermocouple (GASV42)
- Supplied with horizontal or vertical top loader outlet
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Waste plug (fits CE Eco, CE+ & CEFT, June 2011 onwards) (XTRAY)
- Waste plug plunger
- Swaged stainless steel
- NB:This part only fits Far East cookers built after June 2011, it is not interchangeable with others. For assistance please send us photographs of you cooker, but we cannot advise on purchases for cookers built by other manufacturers, which are at your own risk.
- Weight 1.3 kg
Pilot light 3 way side-entry adjustable (fits CE, CE Eco, CE+, September 2007-2010) (BURN001)
- 3 way adjustable pilot, side entry (G04C CTB/U/3/EXT)
- Stainless steel cover (BURN001A) in photo is not included , please order separately if required
- Can also be replaced with bottom entry pilot BURN00G/A, flexi tube and 6 mm olive.
- Please ensure the pilot ordered will fit the wok cooker, they are not interchangeable.
For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Food Safe Sanitiser and Degreaser (makes 20 spray bottles)
3 in 1: Degreases, Sanitises and Shines
Scroll down to see demonstration video!
- Easy to store: Each 10 cm tub makes 20 spray bottles (total 14 litres of chemical)
- Quick and easy to use: The powder is pre-measured in plastic capsules that dissolve in water. There’s no need to measure or come in to contact with concentrated chemicals. There is no need to cut or pierce the plastic capsules as they dissolve in water, so there’s no mess.
- Powerful: Degreases, anti-bacterial disinfects and sanitises to BS EN 1276 standards.
- Food safe: Does not deodorise or contain perfumes/scents
- Suitable for all commercial kitchen surfaces: Will add a lasting shine to all metal surfaces and suitable for use on plastic and wood too
- Great Value: equivalent to only 83p per 700 ml bottle!
- Solucaps Food Safe Degreaser/li>
Gas isolation 1″BSP valve with yellow handle (GASV11a)
- Full bore ball valve for gas
- 1″ BSP threaded, Female x Female (inner diameter approx 32 mm)
- Complete with yellow sleeved lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Supersedes old part GASV11 (1″ CIM isolation valve with aluminium handle) but some pipework adjustment will be necessary as the length is different. The handles are not interchangeable. Alternatively replace the iron pipe for copper and fit a compression valve
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Water tap 3/8BSP valve (Fits all Far East cookers 1998 onwards) GASV00
- 3/8″ BSP threaded CIM ball valve for water, Female x Female
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
V6 JP1 spider ¼” gas burner (BURN13D)
** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.
- V6 JP1 “Spider” vortex burner which will fit most wok cookers (if not replacing like-for-like, contact the appliance manufacturer first)
- Comes complete with collar and 6 jets (natural gas as standard, LPG by request)
- Dimensions ø255×125, ¼” BSP inlet.
NB: specification differs between manufacturers, this burner will fit Far East cookers but we cannot advise on purchases for other cookers, which are at your own risk. - Weight 9.5 kg
** This item has been permanently discontinued as of January 2022 and no stock remains **
They were not typically fitted to Far East cookers built after 2006. They can be replaced with modern V12 burner although the fitting size and dimensions are different so we strongly recommend a Far East engineer attends to perform this work.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Reviews
There are no reviews yet.