Additional information
| Weight | 11.3 kg |
|---|---|
| Dimensions | 335 × 335 × 150 mm |
Cast iron wok ring (XTRAO)
£220.00 +VAT
- Heavy duty cast iron (special high temperature grade), built to last! Weighs 11.3 kg / 25 lbs
- Universal fit for front rings: suits hole inner diameters between 278 and 305 mm, click here to see dimension drawing
(this covers all Far East standard size front rings, and most other manufacturer’s wok cooking ranges too), which makes it ideal to replace burnt out rings on most wok cookers.
- 330 mm finished diameter, fits woks Ø12″-16″. Projects 70 mm above the resting point on the cooker
- Reduces gas consumption and cooks faster! Cast iron “dual heat” retains heat and spreads it around the wok.
Burner not included
Related Products
Waste basket (XTRAG)
- Perforated mesh strainer with 3mm holes to filter food debris before it enters drainage pipes
- Carrying handle to assist removal and emptying
- All 304 stainless steel heavy duty welded construction
- W88xD355xH97mm, 1.05 kg for Far East CEFT wok cookers built June 2016 onwards:
- W90xD190xH65mm for all Far East CKRW and CE cookers, plus CEFT wok cookers built before May 2016
- NB: we cannot advise on compatibility with cookers built by other manufacturers, these purchases are at your own risk. If you need a different size, please e-mail us a drawing and we will quote
3 bar burner (BURN08/A)
- Fits most Far East wok cookers (CKRW, CE, CEFT) with 3 bar manifold fitted
- Suitable replacement for discontinued Black Teknigas bar burners
- 304 stainless steel
- Dimensions (mm): H40 x W160 x D285.
NB: inlet spacing differs between manufacturers, this burner will only fit Far East cookers, we cannot advise on purchases for other cookers, which are at your own risk. Burners that look the same may have different spacing - Weight 1.3 kg
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
2 bar burner for front rings (BURN07AF)
- Fits older Far East CKRW cookers only with 2 bar manifold fitted
- Dimensions (mm): H40 x W125 x D285
NB: inlet spacing differs between manufacturers, this burner will only fit cookers originally built by Far East, we cannot advise on purchases for other cookers, which are at your own risk and non-refundable. - Weight 1.1 kg
Gas pilot ¼BSP valve with yellow T handle (fits later CKRW) (GASV61)
- Full bore CIM ball valve for gas
- ¼” BSP threaded, Female x Female (inner diameter approx 13 mm)
- Complete with yellow aluminium lever handle
- Certified to BS EN 331:1998 for use with low pressure natural gas or LPG
- Please ensure the valve you order will fit your wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise on cookers manufactured by others, those purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
Gas equipment fitted with this valve is unlikely to have Flame Safety/Supervision Device (FSD thermocouple) and therefore not CE or UKCA compliant, nor meet Gas Safe current standards. This equipment will likely be over 25 years old and should be replaced.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Waste plug (fits CE Eco, CE+ & CEFT, June 2011 onwards) (XTRAY)
- Waste plug plunger
- Swaged stainless steel
- NB:This part only fits Far East cookers built after June 2011, it is not interchangeable with others. For assistance please send us photographs of you cooker, but we cannot advise on purchases for cookers built by other manufacturers, which are at your own risk.
- Weight 1.3 kg
Gas safety valve ½BSP (fits CE, CE ECO, CE+ & CEFT, 2002 onwards) (GASVCE7)
- ½” BSP CE gas valve with FSD function (flame safety device) and pilot control
- Excludes handle (GASVCE7H) and thermocouple (GASV42)
- Supplied with horizontal or vertical top loader outlet
- Please ensure the valve ordered will fit the wok cooking range, they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk). IMPORTANT: The inches refer to the BSP thread type and NOT the actual pipe or valve diameter
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
V21 vortex gas burner (BURN20T/BURNV21)
- V21 Vortex burner (these are sometimes erroneously called turbos, but they are atmospheric burners!)
- Comes complete with inner and outer cast collars plus 21 jets (natural gas as standard, LPG by request)
- ½” BSP inlet
- Includes welded mounting bracket to support pilot light and thermocouple as required on Far East wok cookers
NB: inlet size differs between manufacturers, this burner will replace Far East V21 but we cannot advise on purchases for other cookers, which are at your own risk.
All gas parts must be installed by a Gas Safe Registered engineer in accordance with the Gas Safety (Installation and Use) Regulations (GSIUR) 1998. Please contact us for a quote to fit this part.
Pilot cover shield (fits 3 way pilots on CE, CE Eco, CE+ & CEFT, Sept 2007 onwards) (BURN00BA)
- Shields pilot light and thermocouple FSD protecting them from water splashes that could extinguish the flame
- Reduces build up of oil and grease contamination in pilot injector jet and on thermocouple probe
- All 1.2mm 304 stainless steel construction for longevity
- Fits most Far East wok cookers built since September 2007 (3 way pilots: BURN00G, BURN00A and BURN001). Please ensure this cover ordered will fit your wok cooker pilots as they are not interchangeable. For assistance please send photographs of your Far East cooker (we are unable to advise suitability for cookers manufactured by others, purchases are at your own risk).
- Pilot burners shown in any photos are not included but can be ordered separately